HIKVISION DS-K1T981 Series

3. Enable the Aendance Status funcon.
4. Enable a group of aendance status.
Note
The
Aendance Property will not be changed.
5. Oponal: Select an s
tatus and change its name if required.
6. Set the status' schedule. Refers to
Time Sengs for details.
Set Manual and Auto Aendance via Web
Set the
aendance mode as Manual and Auto, and the system will automacally change the
aendance status according to the congured schedule. At the same me you can manually
change the aendance status aer the authencaon.
Before You Start
Add at least one user, and set the user's authencaon mode. For details, see User Management.
Steps
1. Click Conguraon → Aendance to enter the sengs page.
2. Set the Aendance Mode as Manual and Auto.
3. Enable the Aendance Status funcon.
4. Enable a group of aendance status.
Note
The
Aendance Property will not be changed.
5. Oponal: Select an s
tatus and change its name if required.
6. Set the status' schedule. Refers to
Time Sengs for details.
R
esult
On the inial page and authencate. The authencaon will be marked as the congured
aendance status according to the schedule. If you tap the edit icon on the result tab, you can
select a s
tatus to take aendance manually, the authencaon will be marked as the edited
aendance status.
Example
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authencaon from Monday 11:00 to 12:00 will be marked as break.
8.5.18 General Sengs
Set
Authencaon Parameters
Click Conguraon → Gener
al → Authencaon Sengs .
DS-K1T981 Series Access Control Terminal User Manual
92