HIKVISION DS-K1T981 Series

Steps
1. Long tap on the inial page for 3 s and slide to the le/right by following the gesture and enter
the device backend.
2. Tap User → + to enter the Add User page.
3. E
dit the employee ID.
Note
●
The emplo
yee ID should be less than 32 characters. And it can be a combinaon of lower
leers, upper leers, and numbers.
●
The employee ID should not be duplicated.
4. T
ap the Name eld and input the user name on the so keyboard.
Note
●
Number
s, upper case leers, lower case leers, and special characters are allowed in the user
name.
●
Up to 32 characters are allowed in the user name.
5. Oponal: Add a f
ace picture, ngerprints, cards, Pin or iris for the administrator.
DS-K1T981 Series Access Control Terminal User Manual
46