HIKVISION iDS-TCD403-BI - Chapter 4 Record and Capture; 4.1 Set Storage Path; 4.1.1 Set Storage Card

4. Click OK to complete
acvaon.
5. Go to the network sengs interface to modify IP address of the device.
1.2 Login
You can log in to the device via web browser for further operaons such as live view and local
conguraon.
Before You Start
Connect the device to the network directly, or via a switch or a router.
Steps
1. Open the web browser, and enter the IP address of the device to enter the login interface.
2. Enter User Name and Password.
3. Click Login.
4. Download and install appropriate plug-in for your web browser. Follow the
installaon prompts
to install the plug-in.
5. Reopen the web browser aer the installaon of the plug-in and repeat steps 1 to 3 to login.
6. Oponal: Click Logout on the upper right corner of the interface to log out of the device.
Network Trac Camera (for Trac Flow Camera) User Manual
3