HIKVISION iDS-TCD403-BI - 4.1.4 Set Arm Host

Figure 2-2 Draw Lane Lines and Virtual Coil Areas
9. Click Save.
2.2 Set Capture Parameters
2.2.1 Set Supplement Light Parameters
Supplement light can enhance the image stabilizaon and adjust the brightness and color
temperature. You can use supplement light to supplement light at night or when the light is dim.
Steps
Note
Only when the solid light is connected, can the set parameters take eect.
1. Go to Conguraon → Device Conguraon → Capture Parameters → Supplement Light
Parameters .
Figure 2-3 Set Supplement Light Parameters
Network Trac Camera (for Trac Flow Camera) User Manual
6