HIKVISION iDS-TCD403-BI - 5.5 Set Privacy Mask

Figure 4-3 Set Listening Host
2. Set ANPR IP Address/Domain and ANPR Port if you need to upload the alarm
informaon.
3. Set Listening Host IP Address/Domain and Listening Host Port, and check Enable Picture
Uploading Listening if you need to upload pictures.
Note
ANPR and listening conict with each other. When you enable listening host, pictures will be
uploaded via listening host in priority. When you disable listening and have set ANPR IP address
and port, pictures will be uploaded via ANPR protocol.
4. Click Save.
4.1.4 Set Cloud Storage
Cloud storage is a kind of network storage. It can be used as the extended storage to save the
captured pictures.
Before You Start
Arrange the cloud storage server.
Steps
1. Go to
Conguraon → Device Conguraon → Encoding and Storage → Cloud Storage .
Figure 4-4 Set Cloud Storage
2. Check Enable.
3. Select Version.
4. Set the server parameters.
1) Enter Server IP Address and Port No.
Network Trac Camera (for Trac Flow Camera) User Manual
17