HIKVISION iDS-TCD403-BI - Chapter 3 Live View and Local Configuration; Live View; Start;Stop Live View; Select Image Display Mode

Chapter 3 Live View and Local Conguraon
3.1 Live View
3.1.1 Start/Stop Live View
Click to start live view. Click to stop live view.
3.1.2 Select Image Display Mode
Click to display the image in 4:3/16:9/self-adapve display mode.
3.1.3 Select Stream Type
Click / / to select the stream type. It is recommended to select the main
stream to get the high-quality image when the network condion is good, and select the sub-
stream to get the
uent image when the network condion is not good enough. The third stream is
custom.
3.1.4 Capture Picture Manually
You can capture pictures manually on the live view image and save them to the computer.
Steps
1. Click to start live view.
2. Click
to capture a picture.
3. Oponal: Click Conguraon → Local Conguraon to view the saving path of snapshots in live
view.
3.1.5 Record Manually
You can record videos manually on the live view image and save them to the computer.
Steps
1. Click to start live view.
2. Click
to start recording.
3. Click to stop recording.
4.
Oponal: Click Conguraon → Local Conguraon to view the saving path of record les.
Network Trac Camera (for Trac Flow Camera) User Manual
11