HIKVISION iDS-TCD403-BI - Set Quota; Set Record Schedule

2) If you select V2.0, enter accessKey and secretKey of the resource pool.
Note
If you select V1.0, enter User Name and Password.
3) Enter the ID according to the storage area No. of the server.
5. Click Save.
4.2 Set Quota
Set the video and picture
rao in the storage.
Before You Start
Install the storage card.
Steps
1. Go to
Conguraon → Device Conguraon → Encoding and Storage → Storage
Management .
2. Set Picture Quota and Record Quota according to the actual needs.
Note
The percentage sum of the picture and record quota rao should be 100%.
3. Click Save.
What to do next
Format the storage card aer the sengs.
4.3 Set Record Schedule
Set record schedule to record video automacally during congured me periods.
Before You Start
Install the storage card, and the video quota rao is not 0.
Steps
1. Go to Conguraon → Device Conguraon → Encoding and Storage → Record Schedule .
Network Trac Camera (for Trac Flow Camera) User Manual
18