HIKVISION iDS-TCD403-BI - Page 32

Figure 5-2 Set Video Image Parameters
2. Adjust the parameters.
Saturaon
It refers to the colorfulness of the image color.
Sharpness
It refers to the edge contrast of the image.
White Balance
It is the white rendion funcon of the device used to adjust the color temperature
according to the environment.
WDR Mode
Wide Dynamic Range (WDR) can be used when there is a high contrast of the bright area and
the dark area of the scene.
Select WDR Switch Mode and set corresponding parameters according to your needs.
Enable
Set WDR Level. The higher the level is, the higher the WDR strength is.
Enable by Time
Enable WDR according to the
me.
Enable by Brightness
Set Brightness Threshold. When the brightness reaches the threshold, WDR will be
enabled.
Lens Type
In Manual mode, you need to adjust the lens manually.
Brightness Enhancement at Night
The scene brightness will be enhanced at night automacally.
Enable Defog
Enable defog to get a clear image in foggy days.
Enable Gamma Correcon
Network Trac Camera (for Trac Flow Camera) User Manual
22