HIKVISION iDS-TCV507-BIR/1550

Set Space Edit the number of space between the current informaon and the
next one from 0 to 255. 0 means there is no space.
Set Line Break
Characters
Edit the number of characters from 0 to 100 between the current
informaon line and the previous informaon line. 0 means no line
break.
Adjust overlay
sequence
Click / to adjust the display sequence of the overlay
informaon.
8.
Click Save.
Set Face Picture Mang
You can enable driver's, passenger's, or non-motor vehicle user's face picture mang on the
capture violaon pictures and set corresponding parameters.
Steps
Note
Some models do not support face picture mang. The actual device prevails.
1.
Go to Conguraon → Capture → Capture Parameters → Vehicle Feature → Face Picture
Mang .
2.
Check Enable Face Picture Mang.
Figure 1-22 Set Face Picture Mang
3.
Set corresponding parameters.
Face Picture
Mang Object
Driver Face Picture Mang
Check it when you need to detect the driver's face picture. You can also check Face Picture
Mang of Violaon Picture to detect the driver's face in the violaon picture.
Passenger Face Picture Mang
Network Trac Camera Conguraon Manual
43