Need help?Do you have a question about the HIKVISION NETWORK CAMERA and is the answer not in the manual?
General| Operating Temperature | -30 °C to 60 °C (-22 °F to 140 °F) |
|---|---|
| Lens | Fixed or varifocal (depending on model) |
| Compression | H.265+, H.265, H.264+, H.264 |
| Audio | Built-in microphone and/or audio input/output (depending on model) |
| Network | Ethernet (RJ-45) |
| Power Supply | PoE or DC 12V (depending on model) |
| Weatherproof | IP66 or IP67 (depending on model) |
| Image Sensor | CMOS (depending on model) |
| Smart Features | Motion detection, line crossing detection, intrusion detection |
| Storage | MicroSD card slot (up to 256GB), NAS |
| Network Interface | 10/100 Mbps Ethernet |
Details the scope and applicability of the user manual for the network camera.
Provides essential guidelines and precautions for safe product usage to prevent injury or damage.
Outlines compliance with regulations like FCC and EU standards for the network camera.
Specifies the required operating systems, CPU, RAM, and web browser versions for the camera software.
Instructions for connecting and setting up the network camera on a Local Area Network.
Guides for connecting the network camera to a Wide Area Network via static or dynamic IP.
Step-by-step procedures for activating the camera via web browser, SADP, or client software.
Details on how to access and log into the camera interface using a web browser.
Instructions for accessing and managing the camera using the iVMS-4200 client software.
Configuring Wi-Fi connection in Manage mode for network surveillance.
Setting up a direct peer-to-peer Wi-Fi connection without a router.
Easy Wi-Fi connection using WPS (Wi-Fi Protected Setup) for simplified pairing.
Configuring IP address properties for the wireless network interface controller.
Overview and descriptions of the live view page elements and functions.
Detailed guide on using PTZ controls for camera pan, tilt, and zoom.
Instructions for setting, calling, and managing camera presets and patrols.
Configuring local parameters for live view, record files, and captured pictures.
Setting up time synchronization, NTP server, and DST for accurate timekeeping.
Comprehensive network settings including TCP/IP, ports, PPPoE, DDNS, SNMP, and 802.1X.
Configuring video stream types, resolution, encoding, and audio input/output parameters.
Adjusting image quality settings like brightness, contrast, exposure, and day/night modes.
Setting up various alarms such as motion, tampering, input/output, and exceptions.
Setting up heat map for analyzing visitor traffic patterns and dwell times.
Configuring people counting function to track entries and exits in defined areas.
Adding and initializing network-attached storage (NAS) for file storage.
Configuring manual and scheduled recording parameters and types.
Configuring scheduled and event-triggered snapshots and FTP uploads.
Reducing frame rate and bitrate to extend storage time on SD cards.
Setting up cloud storage by connecting to an NVR or storage server.
Setting up counting parameters and detection lines for object tracking.
Viewing and exporting counting data reports like daily, weekly, or monthly statistics.
Configuring vehicle and mixed-traffic detection, lane settings, and arming schedules.
Customizing picture quality, text overlay, and upload content for traffic events.
Selecting dates and using playback controls to view recorded video files.
Setting search conditions like type, start, and end time for log files.
Saving log files to the computer for analysis or record-keeping.
Creating, modifying, and deleting user accounts with different permission levels.
Securing stream data with RTSP authentication and enabling anonymous visits.
Implementing access control by allowing or forbidding specific IP addresses.
Performing essential maintenance like rebooting, restoring defaults, and upgrading firmware.
Configuring RS-232 and RS-485 serial ports for parameter control and PTZ operations.
Guide to using SADP software for searching and managing network devices.
Instructions for configuring port mapping on a router for network access.
To Next Page