199253
(6) -
EN
-
Accella™ Therapy Mattress Instructions for Use Page 31
Mobilizing and Securing
the Patient
Mains power fault
The audible Mains power fault alarm sounds and the corresponding yellow
visual alarm comes on if the device is disconnected from mains, or in the event of
a power failure.
The audible and visual alarms remain active during the transport of the device.
(see “Moving the Patient on the Bed in Transport Mode” page 33)
To stop the alarms, reconnect the mattress to the mains power supply, or press
the button (see "Alarm silence" above).
Malfunction
The light near the symbol indicates the status of the pressure regulation
device in the continuous and alternating therapeutic modes.
In case of device malfunction, or lack of pressure, the Malfunction visual alarm
near the symbol changes from green to yellow.
Refer to the Accella™ Therapy device Service Manual for detailed
troubleshooting instructions.
To Next Page
Loading...
Need help?
General
