199253
(6) -
EN
-
Accella™ Therapy Mattress Instructions for Use Page 35
Moving the Device
Storing the Device
Make sure that the bed chassis brakes are applied to prevent
any accidental movements.
Deflating the standalone mattress*
1. Open the head end zip fastener. Unscrew and remove the deflation plug (A).
2. Undo the two straps that secure the mattress to the bed (at the head and foot
ends) for the Accella™ Therapy version or the knobs for the Progressa™
version.
3. Activate the CPR function.
4. Expel as much air as possible.
5. Deactivate the CPR function .
6. Switch off the mattress using the button on the remote control.
7. Unplug the electrical power cord.
Never pull on the power cable or you may damage it. A damaged
power cord is an electric shock hazard.
8. Starting at the foot end of the bed, roll up the mattress slowly to
allow any remaining air to be expelled.
9. Close the deflation plug.
10. Close the zip fastener.
To Next Page
Loading...
Need help?
General
