199253
(6) -
EN
-
Accella™ Therapy Mattress Instructions for Use Page 37
Moving the Device
10. Starting at the foot end of the bed, roll up the mattress slowly to allow any
remaining air to be expelled.
11. Expel as much air as possible.
12. Screw in the deflation plug.
13. Close the zip fastener.
14. Use the strap on the lower cover to keep the mattress rolled up.
15. Place the rolled up mattress in a plastic bag.
16. Store the mattress in its original packaging or in a transport bag.
Deflate the mattress combined with the Progressa™* bed
1. Switch off the mattress. Press .
2. Wait for the end of the shutdown cycle and till the screen shows that the
mattress can be disconnected.
3. Fold in two at the head end.
4. Disconnect the plug from the bed connector.
5. Remove the cable.
6. Undo the two knobs that secure the mattress to the bed (in the center of the
thigh section).
To Next Page
Loading...
Need help?
General
