13
Hills – ComNav User Manual V1.3 www.das.com.au
- Output Control
Your security system is supplied with two outputs, and can be configured to control up to a total of
16 outputs. These outputs can be used for a variety of applications, such as Intercom door release,
external lighting control, electric shutter control or even garage door control. As additional
equipment is required to enable these features, please contact your service provider for further
details
. Speak with your security provider to discuss possible applications for your installation.
- Select an output number followed by hash – Allows a user to select individual
outputs to control
- For output list – Informs a user of available outputs for selection
.
- To move back to the main menu
- Message Bank
Press [4] to access the message bank. Separate 10 second entry and exit messages can be
recorded, and will be played back to the user who arms (turns on) and disarms (turns off) the
security system.
- Exit message – A 10 second message that will be played after arming the security
system
- Entry
Message – A 10 second message that will be played after disarming the
security system
- To move back to the main menu
Note: Existing messages will be overwritten.
To Next Page
Loading...