Hills DAS ComNav - Record a User Name

39
Hills – ComNav User Manual V1.3 www.das.com.au
User Name – Voice Recording
How to: Record a user name
Step Example
To record a new user name, and add this new recording to connected
VoiceNav code pads.
1.
[PIN]
Call the ComNav via an offsite touch-tone phone to begin the session.
2.
Press [0] for system configuration menu
Press [6] for voice message recording
Press [3] to record or configure a user name
3. Select a user number to record, followed by #
4.
Press #, to record a new user name
5. Record 3 second user name after the beep
6.
1
st
star, moves back to step 4, (select a user number to record)
2
nd
star, moves back to voice message recording menu
3
rd
star, moves back to main menu
4
th
star, disconnects session
Note: If your system is configured with VoiceNav code pads, you will be prompted to either copy
changed recordings or copy all recordings when exiting this menu. Copy changed recordings, will
only add the latest recordings whilst selecting copy-all recordings will overwrite all recordings, new
and old. Please contact your security provider to verify how your system is configured.