4
Hills – ComNav User Manual V1.3 www.das.com.au
Introduction
The Hills ComNav is an intuitive interface module that may be added to your Hills Reliance security
system. It allows authorised users to remotely access and control the security system. Access to
the ComNav can be via any off site touch-tone telephone, web browser or locally via WiFi using a
powerful iPhone application.
When accessing the ComNav via a touch-tone phone, the inbuilt PVG (Personal Voice Guide)
offers users a friendly, easy to operate interface to their security system. The PVG allows new
users to access the full power of their Hills Reliance security system without having to constantly
refer to this manual. You can dial in and check the status of your security system, change a users
pin number, enter a new alarm phone number or simply arm your system with easy to follow voice
promts.
Plain English alarm / system messages can be sent to up to three different phone numbers.
Messages can also be sent to three different numbers via SMS or Email.
Authorised users may customise voice recordings for user names, zone names, area names, room
names, output names and system names. These recordings offer a level of system customisation
usually reserved for more elaborate installations. The ComNav can also store (and forward to
VoiceNav code pads) exit and entry messages. These messages can be left for other users of the
security system.
ComNavs built in web server allows users to arm / disarm individual areas, check system status,
enable / disable user codes, modify Email accounts and SMS / Voice phone numbers from any
standard web browser.
Advanced intercom features are also incorporated within the ComNav. Imagine a visitor to your
home pressing the button at your front door intercom, and then being able to talk to you on your
mobile phone anywhere in the world. Maybe it’s a courier delivering a parcel? You may wish to
open the garage door and allow them to drop the parcel inside.
We trust that ComNav will provide you with ease of access and control of your Hills security
system.
All users of your security system should read and follow the instructions and precautions in this
manual before operating your security system. Failure to do so could result in the security system
not working as intended.
This manual should be kept in an accessible location for the life of the security system. If you do
not understand any part of this manual, you should ask your service provider for further
clarification. Read the entire manual and if possible, practice on the ComNav whilst your security
provider is on site.
To Next Page
Loading...