Need help?Do you have a question about the Hills DAS ComNav and is the answer not in the manual?
General| Brand | Hills |
|---|---|
| Model | DAS ComNav |
| Category | Recording Equipment |
| Language | English |
Details features accessible via a phone line, like voice/SMS reporting and dial-up control.
Describes features combining phone line and network connectivity, including web server access.
Details advanced features integrating phone, network, intercom, and VoiceNav code pads.
Describes how to check the current status of the security system.
Explains how to control the security system, including arming, disarming, and bypassing zones.
Details how to use the intercom functions, including listen-in and two-way communication.
Covers creating and managing user PIN codes, areas, and authority levels.
Explains how to set the system's time and date for logging accuracy.
Details how to adjust independent entry times for up to eight areas.
Details how to adjust independent exit times for up to eight areas.
Details how to check the system status and system troubles.
Explains how to check the status of areas and their arming modes.
Describes how to check the status of zone bypasses.
Explains how to check the event history of the security system.
How to arm/disarm single areas in Away or Stay modes.
How to bypass zones.
How to review event history.
Details the steps for listening in to a VoiceNav code pad or front door station.
Details steps for two-way communication with a VoiceNav code pad or front door station.
Describes how to record a 10-second exit message for system arming.
Describes how to record a 10-second entry message for system disarming.
Covers creating and managing user PIN codes, areas, and authority levels.
Explains how to set the system's time and date for logging accuracy.
Details how to adjust independent entry times for up to eight areas.
Details how to adjust independent exit times for up to eight areas.
Details how to check the system status and system troubles with examples.
Explains how to check area status with examples.
How to check the system's current time and date.
Provides instructions on how to access the ComNav's web interface using IP address or hostname.
Shows the menu structure for master user access via the web.
Shows the menu structure for standard user access via the web.
To Next Page