44
Hills – ComNav User Manual V1.3 www.das.com.au
System Name – Voice Recording
How to: Record a system name to the ComNav
Step Example To record a system name for the ComNav.
1.
[PIN]
Call the ComNav via an offsite touch-tone phone to begin the session.
2.
Press [0] for system configuration menu
Press [6] for voice message recording
Press [8] for system name recording
3.
Press #, to record a new message
4.
Record 3 second room name after the beep
5.
1
st
star. Moves back to voice message recording menu
2
nd
star, moves back to main menu
6.
Note: This menu will only be presented if your system is configured with
VoiceNav code pads, otherwise proceed directly to step 8.
Press [1], to copy changed recordings
Press [2], to copy all recordings
7.
3
rd
star, disconnects session
To Next Page
Loading...