Hills DAS ComNav - Stay Arm a Single Area in a Multi Area System; Disarm a Single Area in a Multi Area System

22
Hills – ComNav User Manual V1.3 www.das.com.au
Stay Arm – Multi area system – Single Area
How to: Stay Arm a single area in a multi area system
Step Example: Away arm area 2 in a Multi area system
1.
[PIN]
Call the ComNav via an offsite touch-tone phone to begin the session.
2.
Press [2] for system control menu
Press [2] two for area control menu
Press [1] one to control an individual area
3.
Select an Area number from 1 ~ 8
4.
Press [3], To set in the stay mode
5.
1
st
star, moves back to system control menu
2
nd
star, moves back to main menu.
3
rd
star, disconnects session
Disarm – Multi area system – Single Area
How to: Disarm a single area in a multi area system
Step Example: Disarm area 2 from within a Multi area system
1.
[PIN]
Call the ComNav via an offsite touch-tone phone to begin the session.
2.
Press [2] for system control menu
Press [2] for area control menu
Press [1] to control an individual area
3.
Select an Area number from 1 ~ 8
4.
Press [1], To turn off
5.
1
st
star, moves back to system control menu
2
nd
star, moves back to main menu.
3
rd
star, disconnects session