50
Hills – ComNav User Manual V1.3 www.das.com.au
Users
The user configuration menu is where user PIN codes are assigned to users, a user code is used
to arm and disarm areas within your security system. They are generally four digits in length, but
can be configured to be six digits in length if this level of security is required (contact your security
provider to enable 6 digit PINs). The user configuration menu is where you also assign area
control and adjust authorisation levels to each user. Assigning areas to users, determines which
sections (areas) of the security system a user may access. The authorisation level determines the
options available to that user, user authorisation is where you would alter and increase a users
authority to become a Master Code. Master codes can only create, delete or modify user codes
with equal or less authority than themselves.
Logout
Status and Control
Voice Reporting
Users
SMS Reporting
Call Divert
Email Reporting
To Next Page
Loading...