Hills DAS ComNav - System Status Menu; Security System Status; Area Status; Zone Bypass Status

17
Hills – ComNav User Manual V1.3 www.das.com.au
Main menu Controls and examples
Menu 1 -
System Status

2.1
Security System Status
2.2
Area Control
2.3
To Control Zone Bypass
2.4
Event History
The ComNav will announce the Hills Reliance panel status in the following order
1.
Zone Number / Zone Name
In Alarm
2. System troubles
AC power fail, low battery, battery test fail, box tamper, siren trouble, over
current fault, time and date loss, communication fault, and telephone line fault.
Expander: AC power fail, low battery, box tamper, communication fault.
Code pad: fire, panic, medical alarm.
Zone number / zone name: fire, tamper, trouble fault, loss of wireless
supervision, low battery.
Area / Area name
Is On in the away mode, Is On in the stay mode, Is ready, Is not ready, All areas
are on in the away mode, All areas are on in the stay mode, armed in the stay
mode, All areas are ready
3.
Zone Number / Zone Name
Is bypassed, chime is set, is not secure
4.
Time and date
Optional
Ho
w to: Check system status
Step Example: Checking system status
1.
[PIN]
Call the ComNav via an offsite touch-tone phone to begin the session.
2.
Press [1] for security system status
3.
1
st
star, disconnects session