33
Hills – ComNav User Manual V1.3 www.das.com.au
Menu 0 - System Configuration
0.1 User Configuration
0.2 Time & Date
0.3 Area Entry Time
0.4 Area Exit Time
0.5
Phone number configuration
0.6 Voice message recording
Area Exit time Configuration
Area Exit time – Independent entry times can be assigned for up to eight areas, values are from
10 seconds to 255 seconds
How to: Adjust the area Exit time
Step Example Adjust area entry times
1.
[PIN]
Call the ComNav via an offsite touch-tone phone to begin the session.
2.
Press [0] for system configuration menu
Press [4] for area exit times
3.
Select an area number to configure. (from 1 ~ 8)
4.
Select a new area exit time (10 ~ 255 seconds) followed by #.
5.
1
st
star, moves back to step 3, select an area number to configure
2
nd
star, moves back to system configuration menu
3
rd
star, moves back to main menu.
4
th
star, disconnects session
To Next Page
Loading...