55
Hills – ComNav User Manual V1.3 www.das.com.au
Area Number / Area Name
Is On in the away mode – This area is armed in the away mode
Is On in the stay mode – This area is armed in the stay mode
Is ready – This area is secure and ready to be armed
Is not ready – This area is NOT ready to be armed, a zone is not secure
All areas are on in the away mode – All areas in this multi partition system are
armed in the away mode
All areas are on in the stay mode – All areas in this multi partition system are
armed in the stay mode
All areas are ready – All areas in this multi partition system are secure and
ready to be armed
System
AC power fail – The security system has lost its electricity power
Low battery – The security system’s back up battery requires charging
Battery test fail – The security system’s back up battery requires changing
Box tamper – The security system’s cabinet tamper input has activated
Siren trouble – The security system’s external siren has a problem
Over current – The security system is drawing too much current
Time and date loss The security system time and date need resetting
Communication fault – The security system has detected a problem with the
phone line
Expander
Low battery – A remote power supply’s back up battery requires charging
AC power fail – A remote power supply has lost its electricity power
Box tamper – An expander’s cabinet tamper input has activated
Code Pad
Fire alarm – A fire alarm has been activated at the code pad
Panic – A panic alarm has been activated at the code pad
Medical – A medical alarm has been activated at the code pad
To Next Page
Loading...