141
────────────────────────────────────────────────────
5.6 Testing Using EXT I/O
────────────────────────────────────────────────────
Panel Save Screen
Continuous Test Screen
NOTE
(2) Details of the Setting Process
This section describes procedure when performing continuous testing with
panel numbers 6, 8, and 10 for example.
1. Save the continuous testing conditions on the panel number 6, 8, and 10.
The continuous testing is performed for the first and third parameters which
have been saved.
For details on panel save function, see Section 4.16.
2. Shift to the continuous test screen.
If the power is cut on the continuous test screen, the machine will shift to
the continuous test screen the next time the power is turned ON.
The panel numbers which test conditions are not saved or which are
invalid even if test conditions are saved (when the first and third
parameters are both off, or when the parameters are other than Rs or Rp
during DC measurement), are not displayed.
To Next Page
Loading...
