19
────────────────────────────────────────────────────
3.3 Basic Measurement
────────────────────────────────────────────────────
Digit Screen
Ten Key Screen
Ten Key Screen
Digit Screen
There are actually two frequency setting screens. The display can be
switched over between these two screens just by pressing a particular soft
key.
The Digit screen
The test frequency is input using the
and
d
igit keys.
The Ten key screen
A numerical value for the test frequency is input
directly.
In this case, because it is desired to input the
value 120 Hz for the test frequency directly as
a numerical value, the Ten key screen is used.
When the Digit screen is being displayed,
pressing the soft key causes the display to
switch over to the Ten key screen.
To Next Page
Loading...
