vi
___________________________________________________________________
Precautions
___________________________________________________________________
WARNING
Before using the product, make sure that the
insulation on the leads is undamaged and that no
bare conductors are improperly exposed. Using the
product in such conditions could cause an electric
shock, so contact your dealer or Hioki representative
for replacements. (Model 9460)
Be sure to connect the SOURCE and SENSE
terminals (banana plugs), and TEMP SENSOR
terminal (mini-plug) correctly. See Section 4.2,
"Measurement" for details of the connections.
To avoid injury or damage to the product, do not
attempt to measure AC voltage, or DC voltage
exceeding 50 V.
50 VDC max.
Do not apply a voltage between the SOURCE(+) and
SENSE(+) or SOURCE(-) and SENSE(-) terminals.
This could result in damage to the unit.
CAUTION
This product is not designed to be entirely water- or
dust-proof. To avoid damage, do not use it in a wet or
dusty environment.
To Next Page
Loading...
