Hioki 3550 - Setting the Comparator Function

24
___________________________________________________________________
Chapter 5 Advanced Measurement Functions
___________________________________________________________________
Lower resistance limit Upper resistance limit
Comparator
number
Resistance
range
5.1.2 Com
p
arator Settin
g
s
(1) Before changing the settings
To set the comparator (upper and lower resistance limits and
voltage comparison value), do the following:
1. Press and hold the
COMP
key for at least 3 seconds. The
upper and lower resistance limit settings appear.
2. "
COMP.SET
","
OHM
" appears at the lower left of the screen,
showing that you are ready to change the comparator
settings.