Hioki 3550 - Chapter 3 Specifications; General Specification

9
___________________________________________________________________
Chapter 3 Specifications
___________________________________________________________________
Measurement method
Resistance: AC four-terminal method.
Temperature: platinum temperature
sensor.
A/D conversion
Double inte
gration method.
Display
LCD and LEDs (comparator output)
Panel abbreviations
and symbols
HOLD
,
COMP
, ,
DATA
,
MEMO
,
No.
,
m
,
Ω
, ,
COMP.SET
,
OHM
,
VOLT
,
V
,
o
C
Sampling rate
0.83 sets (resistance, voltage, and
temperature measurements)/second.
Open-circuit terminal
voltage
5Vmax.
Input overflow
"OF" indication
Battery low detection
" " indication (indicates at 6.4 V
with LR6 X 6)
Constant current fault
detection
"----" indication.
Moving average
function
measurement (can be set to on or off)
Zero adjustment
function
Circuit offset voltage is displayed as
0V.
Hold function
Display is held.
Chapter 3
Specifications
3.1 General Specification