19
___________________________________________________________________
Chapter 4 Standard Measurement
___________________________________________________________________
WARNING
To prevent electric shock, before using this tester,
fit the supplied dust cover for the printer interface
over the PRINT terminal.
To avoid injury or damage to the product, do not
attempt to measure AC voltage, or DC voltage
exceeding 50 V.
CAUTION
Do not attempt to measure the voltage of a generator.
This would result in an AC voltage being applied to the
voltage-generating output terminals, which is
dangerous.
After measuring a high-voltage battery, before
continuing to measure a low-voltage battery first short
the measurement leads together. This will discharge
the DC-elimination capacitor which is connected across
the leads. Otherwise an excess voltage may be
applied to the low-voltage battery, which is dangerous.
4.2 Measurement
To Next Page
Loading...
