35
___________________________________________________________________
Chapter 5 Advanced Measurement Functions
___________________________________________________________________
NOTE
5.2.3 Readout
Redisplay a measurement value from memory as follows.
1. Press the
READ
key.
The "
MEMO
" indication appears in the upper right and the
number of "
No.
" indication flashes.
MEMO
means that the currently displayed readings are
values recalled from memory.
The flashing number is the number of the set of values
currently displayed.
2. Pressing the
UP
key or
DOWN
key increments or
decrements this number, to display whichever set of data
values is required.
The comparator result for previous data values read out from
memory is also shown, but a "WARNING" result does not flash.
In the case of a "WARNING" the display is permanently on.
Data cannot be redisplayed when "
DATA
" does not appear at the
upper right of the screen (when there is no data in memory).
To Next Page
Loading...
