ii
___________________________________________________________________
Safety
___________________________________________________________________
DANGER
This product is designed to conform to IEC 61010
Safety Standards, and has been thoroughly tested for
safety prior to shipment. However, mishandling
during use could result in injury or death, as well as
damage to the product. Be certain that you
understand the instructions and precautions in the
manual before use. We disclaim any responsibility for
accidents or injuries not resulting directly from
product defects.
The symbol printed on the product indicates
that the user should refer to a corresponding
topic in the manual (marked with the
symbol)
before using the relevant function.
In the manual, the symbol indicates
particularly important information that the user
should read before using the product.
Indicates DC (Direct Current).
Indicates the ON side of the power switch.
Indicates the OFF side of the power switch.
Safet
Safety symbols
This manual contains information and warnings essential for
safe operation of the product and for maintaining it in safe
operating condition. Before using the product, be sure to
carefully read the following safety notes.
To Next Page
Loading...
