12
___________________________________________________________________
Chapter 3 Specifications
___________________________________________________________________
Standards applying
EMC
Safety
EN61326:1997+A1:1998+A2:2001
+A3:2003
EN61010-1:2001
Pollution Degree 1,
Measurement Category I
(anticipated transient overvoltage
2500 V)
Accessories
9460 CLIP TYPE LEAD WITH
TEMPERATURE SENSOR
9382 CARRYING CASE
Instruction Manual
Dust cover (for the printer interface)
Six LR6 alkaline batteries
Options
9203 DIGITAL PRINTER
9425 CONNECTION CABLE
(2-meter long for connecting to the
9203)
9233 RECORDING PAPER
(ten 10-meter rolls for the 9203)
Accuracy
We define measurement tolerances in terms of f.s. (full
scale), rdg. (reading) and dgt. (digit) values, with the
following meanings:
f.s. (maximum display value or scale length)
The maximum displayable value or the full length of the
scale. This is usually the maximum value of the currently
selected range.
rdg. (reading or displayed value)
The value currently being measured and indicated on the
measuring product.
dgt. (resolution)
The smallest displayable unit on a digital measuring product,
i.e., the input value that causes the digital display to show a
"1".
To Next Page
Loading...
