Hioki 3550 - Troubleshooting Data and Printing Issues

50
___________________________________________________________________
Chapter 6 Maintenance
___________________________________________________________________
Symptom Cause Follow-up
Data in memory is not
displayed when the
READ
key is
pressed.
Thereisnodatain
memory.
Storedatainmemory.
See Section 5.2, "Measurement
Value Memory Function."
Printing is not
possible.
Thereisnodatain
memory.
Storedatainmemory.
See Section 5.2, "Measurement
Value Memory Function."
The comparator setting
screen appears.
Exit the comparator setting
screen, to return to the
measurement screen.
See Section 5.1, "Comparator
Function."
The connecting cable is
not correctly connected.
Correctly connect the
connecting cable.
The printer is not ready. Turn the printer power on and
set correctly.
NOTE
To avoid problems with battery operation, remove the
batteries from the product if it is to be stored for a week
or more.
When sending the product for repair, remove the batteries
and pack carefully to prevent damage in transit. Include
cushioning material so the instrument cannot move within
the package. Be sure to include details of the problem.
Hioki cannot be responsible for damage that occurs during
shipment.
Never modify the product. Only a Hioki service engineer
can disassemble or repair the product. Failure to observe
these precautions may result in fire, electric shock, or
injury.