Hioki BT3554 - 9.2 Troubleshooting; Before Returning for Repair

98
)XQFWLRQDO6SHFL¿FDWLRQV
Storage Data is stored in the internal non-volatile ROM.
 Storing data in memory
How to enable: Press the MEMO key while the memory
function is of
f.
How to cancel: Press and hold the MEMO key while the
memory function is on.
How to store data:
1. Select the memory number with the cursor keys.
2. Press the MEMO key to store the data while it is being
retained.
3. Measurement values are stored when they are held if
the auto-memory function is on.
 Reading out data from the memory
Press the READ key to read out, and select the memory
number to be read out with the cursor keys.
Application software can be used to read out the data.
 Clearing the data from the memory
Cycle through the clearing methods by pressing the
CLEAR key.
6LQJOHGDWDĺVLQJOHXQLWĺDOOGDWDĺVLQJOHGDWDĺDQG
so on.
(7) Auto-memory function
Functionality The function automatically stores measurement values in
memory when they are retained.
The stored data can be cleared by the CLEAR key.
Default
OFF
How to set Use the A.HOLD/MEMO key to turn it on and off.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com