84
Accuracy Table
Integration
time display
59:59 [min:sec] The time is incremented by 1 s from 00:00 [min:sec].
When 59:59 [min:sec] is exceeded
,
the range is
switched to the 48:00 [hour:min] range.
During integration using the 48:00 [hour:min] range
,
the
“ : ”
display ashes every 0.5 s.
48:00 [hour:min]
(6) Phase detection
Detected voltage range 80 V AC to 600 V AC
Detection target frequency 50 Hz/60 Hz (sine wave)
Phase order detection* Normal phase (Display: 123)
Reverse phase (Display: 321)
Open phase or unable to measure (Display: – – – –)
* After the second measurement display appears
,
and the second measurement value does not become
stable over 10 seconds
,
it is unable to make a measurement.
To Next Page
Loading...
