To Next PageTo Next PageWhy is a sound being emitted by the jaw of my Hioki Measuring Instruments?
The jaw of your Hioki Measuring Instruments may emit a sound when measuring AC currents exceeding approximately 500 A. This is normal and does not affect the accuracy of the measurement.
General| Type | Clamp Meter |
|---|---|
| Display | LCD |
| Continuity | Yes |
| Dimensions | Approx. 270 x 90 x 40 mm |
| Weight | Approx. 600 g |
| Battery Life | Approx. 100 hours |
| Frequency | 5 Hz to 1 kHz |
| Jaw Diameter | 33 mm |
| Basic Accuracy (AC Current) | 1.5% + 5 digits |
| Basic Accuracy (DC Current) | 1.5% + 5 digits |
| Basic Accuracy (AC/DC Voltage) | 1.0% + 3 digits |
| Safety Standards | CAT III 600 V |
| Power Supply | AA batteries |
Welcome to the AC Clamp Power Meter instruction manual.
Lists included items and shipment handling precautions.
Details optional accessories available for the instrument.
Covers DANGER and WARNING statements for safe instrument operation.
Outlines DANGER, WARNING, and CAUTION statements for proper use.
Explains measurement categories (CAT II, III, IV) and voltage ratings.
Identifies front, rear, and accessory components of the instrument.
Describes the functions of the instrument's operational keys.
Explains connection and measurement displays and basic screen navigation.
Details battery installation, status indicators, and replacement.
Illustrates how to connect the clamp and clips for measurement.
Procedure for measuring AC current, voltage, and frequency.
Covers single-phase and three-phase power measurement procedures.
Procedure for detecting phase order and identifying abnormal conditions.
Details single-phase active energy measurement and comparison.
Explains manual and auto hold operations and conditions.
Manages display backlight and auto power save (APS) functions.
Covers setup, pairing, and measurement using Bluetooth®.
Provides guidance on instrument care, calibration, and shipment.
Lists common problems and their verification/solution steps.
Explains instrument error codes and warning indicators.
Details operating environment, power, dimensions, and measurement items.
Defines accuracy terms, conditions, and external influences.
Presents detailed accuracy data for various measurements.
Provides mathematical formulas for power calculations.
Information regarding the product warranty period and coverage.
