17
Parts Names and Functions
Operation keys
(*) Pressing a key for at
least 1 second activates
the function indicated
above the key. To disable
the function, change the
rotary switch setting.
1
• Displays the maximum or minimum value. (p. 61)
• (*) activates the relative value display function. (p. 63)
2
• Selects the range (manual range). (p. 55)
• (*) changes to the auto range.
(The default is the auto range.)
3
Changes to the peak measurement. The maximum or
minimum instantaneous value is measured. (p. 62)
4
• Deletes the stored data. (p. 68)
• Clears the maximum or minimum value. (p. 61)
• Clears the peak value. (p. 62)
5
• Retains the displayed value. (p. 57)
• (*) activates the auto hold function.
6
• Reads the stored data. (p. 67)
• (*) toggles the lter function between on and off. (p. 60)
7
• Saves the measurement data. (p. 65)
• (*) toggles the display update speed between normal and
slow. ([SLOW] is used to stabilize the display.) (p. 59)
8
Turns on or off the display backlighting. (p. 69)
9
Increases/Decreases the memory No. or numeric value.
(When
/
are displayed on the LCD, these keys can be
operated.)
10
Changes the function of the rotary switch to that indicated
shown in blue.
1
2
3
4
5
6
7
Appx. Ind.
To Next Page
Loading...
