Hioki DT4282 - 3.8 Measuring Temperatures

45
Measuring Temperatures
3.8 Measuring Temperatures
Using our optional DT4910 Thermocouples (K), temperatures can
be measured.
CAUTION
To avoid damage to the instrument, do not input any
voltage or supply current to the thermocouple.
1
2
3
DT4910
Be careful to
observe the polarity
when connecting
the thermocouple.
When a breaking state of
the Thermocouples (K) is
detected
TEMP C
TEMP FVERSION
RESET
０－２０mA電源遮断断線（Ｋ熱電対）####
オートパワーセーブＯＦＦブザーＯＦＦメモリデータクリアメモリデータなし
Checking the temperature change
Check the following values.
• Relative value display (p. 63)
• Maximum/Minimum value display
(p. 61)
Changing the temperature units
Celsius and Fahrenheit can be
switched. (p. 75)
1
2
3
4
5
6
7
Appx. Ind.
HIOKI DT4281A981-08