61
Checking the Maximum/Minimum Value (MAX/MIN)
4.5 Checking the Maximum/Minimum
Value (MAX/MIN)
The maximum/minimum value after start of the measurement can
be checked.
Press .
Each time the key is pressed, the display is
changed in the order of the maximum value
(MAX), minimum value (MIN), and current
value.
A buzzer sounds when the maximum value is
updated with MAX displayed or the minimum
value is updated with MIN displayed.
The maximum and minimum values are for the displayed value;
they do not relate to peak values such as AC signals.
The main and sub displays update their maximum and minimum
values individually.
Clearing the existing maximum/minimum value
When MAX or MIN appears, press
.
Both maximum and minimum values are cleared.
After this, the maximum and minimum measurement values after clearing the
previous ones are retained.
When saving to memory, only the value displayed on the screen (current
value, maximum value, or minimum value) can be saved.
1
2
3
4
5
6
7
Appx. Ind.
To Next Page
Loading...
