72
Communicating with PC
4.13 Communicating with PC
Using the optional DT4900-01 Communication Package, it is
possible to transmit data to the PC or to control the instrument.
For details, see the Instruction Manual which accompanies the
communication package.
Install the special software on the PC.
(See the Instruction Manual which accompanies with the
communication package.)
Dedicated Software (p. Appx.4)
Attaching the USB cable to the instrument (p. 73)
Connect to the PC.
The virtual COM ports of the PC can be used as the USB interface.
• Communication method: Start-stop system, half-duplex transmission
• Baud rate: 19200 bps xed • Parity: None
• Data bit length: 8 bits • Flow control: None
• Stop bit: 1 bit • Delimiter: CR+LF
Controls the
instrument.
Transmits data.
To Next Page
Loading...
