Hioki DT4282 - 3.13 4-20 mA (% Conversion)

53
4-20 mA (0-20 mA) % Conversion
3.13 4-20 mA (0-20 mA) % Conversion
The 4-20 mA (or 0-20 mA) signal of the instrumentation
system can be converted to 0% to 100% and checked.
• 4 mA - 20 mA → 0% - 100%
(An input exceeding 20 mA is displayed up to a maximum of 350%.)
• 0 mA - 20 mA → 0% - 100%
(An input exceeding 20 mA is displayed up to a maximum of 300%.)
3
4
Red
1
2
Black
Sensor
Two-wire
transmitter
Distributor
Output signal
4-20 mA
24 V
Changing to the 0-20 mA signal
TEMP C
TEMP FVERSION
RESET
０－２０mA電源遮断断線（Ｋ熱電対）####
オートパワーセーブＯＦＦブザーＯＦＦメモリデータクリアメモリデータなし
TEMP C
TEMP FVERSION
RESET
０－２０mA電源遮断断線（Ｋ熱電対）####
オートパワーセーブＯＦＦブザーＯＦＦメモリデータクリアメモリデータなし
OVER
レンジオーバーCOPY: MEAS_
4-20
dBV
COPY: MEAS_
dBm
HOLDRANGE過負荷検出
OVER
最大入力範囲超え
ΔＴRELMAXSLOW
1
Turn on the power while
pressing .
2
/ (Select a desired
value.)
3
(Conrm the value.)
The measurement display reappears.
Even after the power is turned off,
the setting is retained.
1
2
3
4
5
6
7
Appx. Ind.
HIOKI DT4281A981-08