59
When the Measured Value Fluctuates (SLOW)
4.3 When the Measured Value
Fluctuates (SLOW)
When the measured value uctuates and cannot be read, it is
possible to stabilize the value. (When is lit)
• When
is off (normal): refer to the display update rate
(p. 80) (Default setting)
• When
is lit (slow): ve times normal (average of 5 times)
OVER
レンジオーバーCOPY: MEAS_
4-20
dBV
COPY: MEAS_
dBm
HOLDRANGE過負荷検出
OVER
最大入力範囲超え
ΔＴRELMAXSLOW
Press for at least 1 second.
( lights up.)
To cancel the state, press it for at least 1
second again.
(
goes off.)
When the measurement function is switched using the rotary
switch or SHIFT, the SLOW setting is disabled.
1
2
3
4
5
6
7
Appx. Ind.
To Next Page
Loading...
