Hioki DT4282 - Power-On Option Table

77
Power-on Option Table
4.16 Power-on Option Table
The settings in the instrument can be changed or checked.
After changing the setting, the measurement display then reappears.
+
Turn on the power while pressing the operation key.
(Turn the rotary switch from OFF.)
Setting
change
Method Ref.
Canceling the
auto power
save function
(APS)
([APS] goes off.)
p. 70
Buzzer
(ON/OFF)
([ ] lights up/goes off.)
p. 69
Automatic
backlight
deactivation
setting
Automatic deactivation disabled:
[oFF], [bL-A]
Automatic deactivation enabled:
[on], [bL-A]
p. 69
Clearing all
memory data
Press this within
3 seconds.
p. 68
System reset
Press this within
3 seconds.
p. 76
Standard
impedance
setting (dBm
measurement)
Select the
desired setting.
Conrm the
change.
p. 41
1
2
3
4
5
6
7
Appx. Ind.
HIOKI DT4281A981-08