Hioki DT4282 - Installation in Measurement Location; Using the Instrument with the Stand; Hanging the Instrument with the Strap

31
Installation in Measurement Location
2.4 Installation in Measurement Location
Using the instrument with the stand
Position the instrument with the stand at the rear.
CAUTION
• Do not position the instrument on an
unstable table or inclined surface.
• When the instrument is set on the stand,
do not apply a strong force above.
Doing so may damage the stand.
Hanging the instrument with the strap
Attach the optional Z5004 or Z5020 Magnetic Strap to the
instrument and attach the magnet to the wall surface (with metal
plate afxed).
Magnet
Attach it to the wall surface
(with metal plate afxed).
Strap holes
Example: model Z5004
1
2
3
4
5
6
7
Appx. Ind.
HIOKI DT4281A981-08