49
Measuring Current
3.11 Measuring Current
DC/AC is measured.
DANGER
• Do not input any voltage to the current
measurement terminals.
Doing so may result in short circuit accidents.
• To avoid electrical accidents, turn off the power to
the circuit before measuring and then connect the
test leads.
Measuring DC/AC
Function
is used to toggle
between DC and AC.
µA Selected to measure 6000 µA or less.
→
mA Selected to measure 600 mA or less.
→ → *
A Selected to measure 10 A or less.
(DT4282)
→
* The 0-20 mA input can be selected via the power-on option. (p. 77)
When measuring an unknown current
Set to the high range (mA for the DT4281, A for the DT4282).
1
2
3
4
5
6
7
Appx. Ind.
To Next Page
Loading...
