27
Inserting/Replacing Batteries
• The indicator appears when the battery charge diminishes.
Replace the batteries as soon as possible.
• After use, be sure to turn off the instrument.
• Handle and dispose of batteries in accordance with local regulations.
1
Have the following items
available and ready.
• Phillips screwdriver
• Alkaline (LR6) battery or
manganese (R6) battery × 4
2
Remove the test leads from
the instrument.
3
Set the rotary switch to OFF.
4
Using a Phillips screwdriver,
remove the screws (2
locations) from the battery
cover on the rear of the
instrument.
5
Remove the battery cover.
6
When replacing the batteries,
remove all old batteries.
7
Insert 4 new batteries (LR6
or R6), being careful to the
battery polarity.
8
Reattach the battery cover.
9
Secure the cover with the
screws.
After the battery cover is removed,
the fuse can be seen. When
replacing the fuse, see “6.4
Replacing Fuses” (p. 106).
Screws
Rear
1
2
3
4
5
6
7
Appx. Ind.
To Next Page
Loading...
