2.1 Installing (or Replacing) the Battery
17
3
2
Chapter 2 Measurement Preparations
Measurement
Preparations Chapter 2
2.1 Installing (or Replacing) the Battery
• After replacing the battery, replace the cover before using the
instrument.
• Be sure to insert them wit
h the correct polarity. Otherwise, poor
performance or damage from battery leakage could result.
Replace batteries only with the specified type.
• Battery may explode if mistreated. Do no
t short-circuit, recharge,
disassemble or dispose of in fire.
• Handle and dispose of batteries in accordance with local regula-
tions.
• Data and settings stored in the logger are retained even when the bat-
tery is depleted, and during battery replacement.
• Testing monitor batteries installed in the unit may possibly be weak.
Replace batteries before extended measurement usage.
• Use only LR6 Alkaline batteries. Using manganese batteries may not
result in accurate measurements or proper communication with the
LR5091 Communication Adapter and LR5092-20 Data Collector.
• After installing the batteries, the following displays appear, and the
d
ate and time need to be set. (p.29)
• When the battery indicator appears, settings cannot be changed
(although they can still be displayed).
1. All segments
2. Model name 3. Firmware version
4. Year Setting display
To Next Page
Loading...
