3.1 Settings List
27
3
3
Chapter 3 Settings
Configure measurement settings before starting to record.
Logger settings can also be made from a PC running the LR5000 Utility Program.
(p.32)
Following is a list of all settings.
Although all settings are available from t
he LR5000 Utility Program, some settings
are limited when made from the logger.
Settings Chapter 3
3.1 Settings List
Setting Item Setting Options Logger Refer To
LR5000
Ut
ility
Program
Refer To
Recording Interval Sets the recording interval. Yes (p.29) Yes (p.35)
Current Date and
Ti
me
Set the current year, month,
day
, hour, and minute. (The
LR5000 Utility Program can
set the logger's clock to
match the computer’s.)
Yes (p.29) Yes
(p.38)
Stop Method
Select the processing
method when memory
becomes full.
Yes (p.30) Yes
Included
in the
recording
stop
method
Recording Mode
Selects instantaneous or
st
atistical value recording
(measurements are taken
once per second, and
instantaneous, maximum,
minimum, and average val-
ues are saved at each
r
ecording interval).
Yes (p.31) Yes
(p.35)
Power Save
Battery life is extended
when on (enabled).
Yes (p.31) Yes (p.34)
Model Comment
Enter a comment for the
speci
fied logger.
No - Yes
(p.34)
Channel Comment
Enter a comment for the
specified measurement
channel.
No - Yes (p.34)
Recording Start
Method
Select the recording start
m
ethod. (The start time can
be specified.)
No - Yes (p.35)
To Next Page
Loading...
