Hioki lr5001 - 4.2 Installing the Logger

3.3 Making Settings from the LR5000 Utility Program
34
How can the settings from one logger be copied to another?
1. From the device list, select a logger with settings to be copied, and click
the [Copy Settings] button.
2. From the device list, select a logger as the destination for the settings, and
click the [Paste Settings] button. (A dialog appears.)
3. Click the [Paste] button in the dialog box. (The settings are copied.)
The Auto Power Save feature consumes a small amount of current
How can I learn more about changing settings?
1 Setting the [Basic Settings]
2 Settings on the [Recording Method] tab
Model 
comment
Enter a comment to describe the logger as needed.
Power save
setting
Enable or disable the power save setting (p.31).
See:
"Appendix 3 Battery Life Approximation" (p.A2)
CH1 comment
CH2 comment
Enter a comment to describe the measurement channel as needed.
Note: Comments may consist
of up to 20 characters. 
The following characters are not allowed: \, /, :, *, ?, ", <, >, and |.
1
2
Click a tab.