How is automatic importing performed?
On the Options screen, enable [Automatically import and store data when the
logger is connected to a computer]. (p.78)
If the previous data has not been imported, informa-
tion is displayed along with the latest data.
After making the [Import Data Selection], click the
[Start Importing] or [Next] button.
Method 1
Edit the save destination (basic setting).
Note: The Options screen settings (p.78) are re-
freshed.
Select the save method.
Three methods are available.
4
Click
5
Method 2
Specify an existing file.*
Method 3
Specify the file naming method
and save destination folder.*
* When data from the same logger already exists, newly recorded
data is appended to it if recording has not been stopped, or saved
as a new item if recording has since been stopped.
Save Method Screen
See: p.57
To Next Page
Loading...
